More Silva action this week with this photo in the newest issue of RideBMX. If you turn to the subscription page you can see this full page photo of Chris with a gap to manual on an apple (from here on out referred to as a ‘gapple’) shot by Trent Barker.
For a limited time when you get a subscription to RideBMX Magazine you will also get a pair of our limited edition MacNeil/RideBMX sunglasses! Hit up their site for all the subscription info and get the magazine sent to your door 9 times a year, and keep the sun out of your eyes too.
Check out the ad we have running in the November issue of RideBMX Magazine of Dillon for his upcoming signature Diller frame. You can expect the frame to drop and be available in early spring, and it’s built to the specs of Dillon and what he wants like a 13.6″ back end with wide clearance to fit fat tires, removable brake mounts and more. We’ll be dropping more info on it soon, but for now you can go check out the sneak peek bike check we did with him here and pick up issue #195 of RideBMX everywhere now.
Practice has already been popping off from the first day of Dew Tour practice and a couple videos are starting to circulate. Check out these two quick edits from RideBMX and The Come Up. How sick is Jeff’s vertical pole jam above at 2:08? Don’t forget that the contest will be live streamed online this weekend. More info here.
For a limited time when you get a subscription to RideBMX Magazine you will also get a pair of our limited edition MacNeil/RideBMX sunglasses! Hit up their site for all the subscription info and get the best magazine sent to your door 9 times a year, and keep the sun from burning your eyeballs at the same time.
While we were in Vegas for Interbike, Fudger pointed a camera at us for RideBMX and we ran through the custom Diller build we were rolling around. Get some more details on it and want you can expect to see from us in 2014. Quick note about the backend length on the Diller frame, it will be 13.6″ long and not the 13.2″ that Carl mentioned.
RideBMX put up a new series of weekend wallpapers and there’s a great one of Silva in there with this pegless toothpick hangover, shot by Fudger. Download it for your desktop here, and you can watch the video that the clip is from here.
Same Lowe has a bike check over on RideBMX right now with his Borato V3. The photos were shot earlier in the spring on our Mexico trip, but Sam knows what he likes to ride and you won’t see too much change on his bike over time. Make sure you read the answers to his questions and you’ll get the scoop on a product are working on with him, and an embarrassing Darcy story too. You can find the bike check here.
Darcy gives you the lowdown on our Network hubs in this new One Hot Product feature from RideBMX. If the video isn’t enough info for you, go check out our flipbook again for more photos and details, then run, don’t walk, to your favourite MacNeil dealer to get these laced up to your ride ASAP.
The September issue of RideBMX is on stands today, and that means another fine MacNeil ad. Check out Greg Flag getting down on a rail in Mexico with a double peg to hard 180 promoting our Capital Pivotal seat and Stump post. Hit up your local MacNeil dealer or favourite mailorder to check out any of our seats and posts.
Ride has another One Hot Product video out, this time for our new Connect cranks. Darcy Saccucci explains some of the finder details about their design in this video. While we are one the topic of Connect cranks, take a look through the flipbook for them if you haven’t yet, and re-watch the promo video we made with Taylor Elvy below.
Sam Lowe is featured in our newest ad in the July issue RideBMX to promote our new Network hubs. The magazine is on newsstands now, and also features an article on our MacNeil in Mexico trip, so go out and get a copy now.
The Network hubs are also out and availble, and if you need a refresher on them, check out the flip book we made here. They feature a female axle with 17mm bolts broached for a 6mm allen key (or a traditional straight axle system for the rear), 36 hole shell, high-quality Japenese body bearings with aluminum hardware, and for the rear hubs a one piece 9T driver with 3 Japenese bearings, and the popular Switch Drive System (SDS) for easy switching between LHD and RHD with a 3-pawl engagement system. Go out and get that at your favourite MacNeil dealer or mailorder today.
Ryan Fudger keeps digging in to the archives and keeps coming up with photos of our dudes. He’s got a second gallery of photos that seem to have gone nowhere that are finally getting their chance to shine, and of course our man Greg Flag has a shot. Check out the Digital Wasteland 2 gallery on RideBMX for this shot of classic Greg style with a fakie hand toucher on a big wall at the Chandler park in Arizona from the Phoenix/Vegas trip we took two years ago.
Darcy Saccucci gives you a complete rundown on Kevin Kiraly’s signature Varsity frame on the RideBMX website. While you’re at it, take another look at the flip book we made for the frame here. These frames are out everywhere now, so hit up your local MacNeil dealer and pick one up this summer!
While Greg was down in Mexico earlier this spring, Ryan Fudger shot a bike check with him detailing his Borato V3 build, with C.K.S. forks, Tabarnak bars, Top Shelf stem, Network wheels, and a lot more. If you thought a bike check could never warm the heart and up lift the soul, then you never read one with Greg. He answers some questions about his particular bike, compares it to a well worn pair of jeans, and shares a heroic story of how he once saved two women from drowning to death. Stop what you’re doing and take a few minutes to read his bike check here.